接洽咱們
DY501型
發熱器熔融武器
可4個樣此外熔融，主動扭捏，主動放肆；
成型。機床自覺煮沸，活躍閉式冷卻塔，活躍而成；
大屏幕中文顯現，過流過溫主動報警堵截；
可灑脫設置提溫tcp連接，預存2個提溫法式風格。
介簡
X放射線熒光闡發對粉狀檢樣，近日包容直接壓片法紀備試件材料十分大多數，但為了粒徑分析、粘土礦物質、偏析等因素的作用，已然引發闡發誤差值，變低稀土事物闡發的精強度與高高精度度，檢樣光催化原理往事不可追為同一個核心的誤差值身分。鋼化玻璃熔融法紀成的試件材料能消弭試件材料的粒徑分析、粘土礦物質、偏析等因素，同時也可變低檢樣稀土事物間的發收和增進因素，會較著全面發展闡發的高精度和高高精度度。對ICP、AA和濕法耐腐蝕闡發胳膊，對難溶仿品，熔融手段一致是一個種很是健全完善的制樣胳膊。
二十多年來國際聯盟所得到的熔融設備均靠自己出口處，報價很是端莊，對類似于情況下排場，本公司的科技研究部門經理于2002年開創實行了挽救全球缺編的DY501型電加熱熔融防具。它汲取了當今社會國際整個市場上之類制樣裝備的憂點，其主要包能抵達甚至是走向外洋之類貨物。這是由于其好的包能和合理的錢，定將代用通道口貨物，并使本這是由于生活緣故暫用不著熔融裝備的客戶可以充分利用它。DY501型電熱器熔融裝備的創立，定將全抗發展獎熔融制樣法，導致發展獎隨著我國闡發界制樣的系數，為各個行業各業引來德奧達的國家經濟生態效益。
Brief Intoduction
Currently, powdered samples for X-ray fluorescence analysis are usually directly pressed into sample pieces. But that kind of sampling has become a major error factor impacting the precision and accuracy of the element analysis due to the granularity effect, mineral effect and segregation effect of the sample pieces. The bead fusion method can eliminate the granularity, mineral and segregation effects of the samples, and can reduce the absorption and enhancement effects between the elements in the sample, and hence evidently increase the precision and accuracy of the analysis. This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.
For many years, the fusion machine used in China were all imported from abroad at very high price. To fill up that gap in Chinese science and technology, the research and development personnel in our company developed the DY501 Electroheat Fusion Machine in the year 2002. This fusion machine absorbed the advantages of all the fusion machine of the same kind in the international markets, with key properties up to or even better than those of the overseas products. With its excellent performance and reasonable price, it will take the place of the imported products and can be affordable for the users which are currently not using fusion units just because of economic reasons. The popularization of the DY501 Electroheat Fusion Machine will rapidly promote the bead fusion method in China and hence improve the sampling quality of the element analysis, which can bring tremendous economic benefit for every industry or trade.
技術性能參數
進行加熱機關單位：3根雙螺旋葉片單端硅碳棒；
最多溫度：1250℃，持續時間可調節為；
測溫度政府部門：2根鉑銠熱電阻，最快溫度檢測1600℃；
容積：與此同時熔融4個印刷品（可都按照玩家要求增加到6個）；
效率：6kw;
供電：380-415V,50-60Hz，三相四線;
長寬（高×寬×深）：500mm×1217mm×500mm;
使用：115kg.
Technical Specifications
Heating unit: 3 pieces of double helix ,single-end, silicon carbide rod
Maximum Temperature: 1250℃,continuously adjustable
Temperature measurement unit: 2 pieces of platinum-rhodium thermocouple, with maximum measurable temperature 1600℃
Capacity: 4 samples simultaneously (maximum 6 samples if required by user)
Wattage: 6kw
Power supply: 380-415V,50-60Hz，three phase
Dimension(Height ×Width × Depth): 500mm×1217mm×500mm
Weight: 115kg
主要代表性
◆敞開心扉CPU微機及PID合理廚藝，大顯示電腦屏幕中文名字顯著,菜單欄式使用；
◆雙轉鼓硅碳棒微波加熱，鉑銠鉑熱電阻測溫度；
◆多可時熔融4個備樣（可假設按照微信用戶重定向帶來到6個）；
◆可之后自由場景人物風格的設定在較多達10個高溫制樣法式風格，其高溫tcp連接，加熱帶寬，究竟工作溫度，坩堝架扭捏期間、浮度、帶寬，冷卻后期間，是否是配電扇，功率不足道等都可以以后確定；
◆除熔融樣倒入完成塑料模接收手動擋外，其他的書均主動的有節制，有保障了產品的樣品的予盾性和平均水平性，認為才能做到不一產品的樣品僅是其氣體優越性而不其他的書優越性；
◆坩堝及成形模頭的支撐架敞開心扉耐高低溫錳鋼鋼弄成,切實保障在底溫狀況發生下無一些無機化學反映出；
◆熔樣室蓋翻閱加裝接納孩子鏈條鏈輪杠桿比例分布，調控輕易自若；
◆應具最低值加載溫差報警器，翻閱熔樣室關電保護；
◆必備條件過流、過溫關閉電源無球并告警，因此過溫關閉電源無球接收與熱處理預熱制樣自力的熱電偶及補償導線測溫度，與熱處理預熱有節制電路設計十路定義三種無球，使過溫關閉電源無球更靠經得住。
Features
◆Applies CPU microprocessor and PID control technique, large screen Chinese display, and menu operation
◆Heating with double helix silicon carbide rod; temperature measured with platinum-rhodium thermocouple
◆Up to 4 samples can be fused simultaneously (maximum 6 samples if required by user)
◆Up to 10 customized heating programs can be preset; within the programs, the heating process, the temperature increase speed, the final temperature, the shaking time, shaking amplitude, and shaking speed of the crucible stool, the cooling time, whether to use fans, the air flow, and so on, all can be preset.
◆Automatic control in all the process except for the filling of the fusion sample, enabling the sameness and homogeneity of the sample; all samples are uniformly the same except for the differences in composition
◆The bracket of the crucible and the mould are made of high temperature alloy, which guarantees no chemical reaction in high temperature
◆Chain wheel lever structure is used in the opening device of the cover of the fusion room, trouble-free for user operation
◆With minimum start temperature alarm and power switch-off protection when the cover of the fusion room is open
◆Automatically switching off power and setting alarm for overcurrent and overheat; independent temperature measurement thermocouples are used for overheat protection and heating control; together with the heating control circuit, they can form treble protection of the system and can make the power switch-off protection for overheat more reliable.